Eliminate Chronic Car Problems With Electric Vehicle Conversions

Regardless of where you travel to in Australia, you will always be putting miles on your car. Unfortunately, the parts used in high performance engines found in modern cars wear out much faster than the ones used years ago. For example, the fuel pump in modern cars often dies out after 60,000 to 90,000 Km of travel. If you check your warranty information, you will most likely find that the fuel pump is not covered after 60,000 Km, even on an extended warranty plan. If your odometer reading is approaching this number, electric vehicle conversions may represent a cost effective way to get out of chronic expenses associated with a high mileage vehicle.

Critical Car Parts and High Compression Engine Wear

Not so long ago, fuel pumps were one of the easiest things on a car to replace. All you really needed to do was search around near the carburetor, take the old pump out, and then put the new one in. Typically, it was a job you could accomplish in under an hour, right in your own back yard. At the same time, fuel pumps tended to cost well under 100.00.

By contrast, today’s vehicles use fuel injectors that require a very high compression ratio from the fuel pump. This type of pump is almost always housed in the fuel tank. They also cost several hundred dollars per unit. In order to replace the pump, you will need to take out the fuel tank, and then hope the mechanic will not damage the neck of the tank while removing the old pump. Because it tends to be a difficult job, you may wind up paying well over $1500.00 to have a new pump installed. On top of that, if they do damage the gas tank, you may wind up spending an additional $1000.00 to solve that problem.

Once the fuel pump is replaced, it can significantly alter the electrical system of the vehicle. For example, a number of cars and trucks develop computer problems, as well as a tendency to die out randomly once the new fuel pump is installed. Electric cars are virtually maintenance free. Electric vehicle conversions are worth exploring, and much safer in this type of situation. At the very least, you won’t have to worry about the motor dieing at an inconvenient time.

While you may not be aware of it, compression gaskets, valves, fuel injectors, and engine heads wear out faster when exposed to higher combustion temperatures and compression ratios. No matter how well you maintain and service your vehicle, it will not change this aspect of modern engine performance. Once your car passes the 100,000 Km mark, the best of the engine and transmission lifespan will be used up. Perhaps this is one of the reasons why very few manufacturers will guarantee a vehicle engine and transmission past 100,000 Km. Under these conditions, electric vehicle conversions offer a viable, safer, and cheaper alternative to help you maintain reliable transportation.

Deep Engine Computer Problems and Internal Combustion Engines

Even though the computer modules in your car are often housed in easy to reach places, they obtain data from sensors deep within the engine. For example, oxygen sensors may be positioned within the cylinder head. There are also some sensors that may be housed deep in the engine block. In some cases, these sensors monitor the flow of oil and coolants through the block. Once these sensors malfunction, they can cause piston heads to seize up, as well as ruin other critical parts of the main engine. At the same time, replacing these sensors may cost several thousand dollars if the engine has to be taken out, or the warranty on the electrical system is up.

Therefore, when the fuel pump causes changes in the electrical system, it can have hidden consequences. As with other electrical devices, when a new component is added, it can disrupt the pattern, and lead to serious consequences. When you make use of electric vehicle conversions, you will not need to worry about disrupting the electrical harness or the engine sensors. In fact, you will no longer need to worry about an engine block at all. Instead, your vehicle will run on a nice, quiet electrical motor that requires very little in the way of maintenance.

The Best Cars for Electric Fuel Conversions

If you buy a used car, you will always worry about repairs if you do not take steps to change the engine, transmission, and fuel pump. That said, if another used car is in better shape than the one you have now, you can always see about getting an electric car conversion in the near future. At the very least, you can have peace of mind knowing that you will get many years of trouble free driving out of it.

People that own cars today do not realize they could have a financial time bomb sitting on their hands. Regardless of whether the fuel pump dies in the middle of traffic, or the engine gaskets blows, it will cost you to have the vehicle repaired. When you are under pressure to get your car back as quickly as possible, you will most likely go on paying bigger repair bills, rather than evaluate the expanded benefits associated with electric vehicle conversions. Take the time now to evaluate your financial commitment to owning a petrol car. Switching to all electric is easier than you realize.

Today, electric vehicle conversions are available right here in Australia. You can easily extend the life of your current vehicle, and help do your part in providing for a cleaner more sustainable future, especially in your part of the world. When it comes right down to it, if you own a car or two, the best thing you can do is look into electric vehicle conversions today.

The Basic Technical Specification Of RC Electric Vehicles Simplified For Beginners

When you are browsing RC automobiles online and decide to check the details of an RC electric vehicle that you are interested in (let’s suppose it is an high speed on road racing car), this is what you will likely be presented with, if you are on a quality, customer-focussed website, that is:

– SP28404 brushless motor
– SP28405 brushless electronic speed control
– Anodized aluminium centre drive joint
– Compact front/rear differentials
– Suspension arms with adjustable Width
– Anodized aluminium radio tray
– Solid shock towers and front/rear bumper
– High quality on-road tires with chrome sprayed rims
– 7.2v 1100mah Ni-Mh battery power required
– 7.2v 1500mah Ni-Mh battery or 7.4v 1300mah lithium battery pack is optional
– Anodized aluminium motor heat guard
– High duty front bumper foam provides
– Vehicle length: 265 mm
– Vehicle Width: 140 mm
– Height: 80 mm
– Wheelbase: 174 mm
– Track Width: 77 mm (F/R)
– Gear Ratio: 10.6:1
– Ground Clearance: 8mm
– Net Weight: 790g
– Wheel Diameter: 49mm
– Wheel Width: 18mm

How do you make head or tail of this fairly detailed specification for your rc electric vehicle, without it resulting in your eyes glazing over? Help is at hand right here. Let us go through these features one by one and you will be overjoyed with enlightenment.

SP28404 brushless motor
This is the latest, more advanced, powerful type of motor, which is reflected in the overall (higher) starting price of the automobile in which it is fitted. The benefits to you are a potentially speedier, more dynamically efficient RC vehicle, with the added bonus that it should be simpler to maintain. RC automobiles with brushed motors however, are the classic, conventional types.

SP28405 brushless electronic speed control
The RC electric vehicle’s speed is regulated with an electronic speed controller (abbreviated to ESC). This is the component that controls the drive motor mentioned above, together with the general electronics. Most automobiles come integrated with the motor and ESC, but are separate purchases in the more enhanced set-ups.

Anodized aluminium centre drive joint
More commonly known as the RC electric vehicle’s drive shaft, this is the central rod that runs from the front to the rear of the automobile. Being made of aluminium makes it lighter without compromising on the vehicle’s overall stability and sturdiness.

Compact front/rear differentials
A differential is a device that in most cases incorporates gears and is designed to drive each pair of front and rear wheels with equal force, but still allows the wheels to rotate at different speeds. Differentials on good electric vehicles are high performance.

Suspension arms with adjustable Width
The suspension arms provide your RC vehicle with powerful cushioning, as in a conventional car. Being adjustable allows the vehicle to be driven at optimum suspension on different terrains, especially when running over bumpy or rocky ground and when turning corners.

Anodized aluminium radio tray
This is tray that houses the in-built radio receiver in your RC vehicle. Being anodized gives it increased corrosion and wear resistance, making it harder than bare aluminium.

Solid shock towers and front/rear bumper
Integrated with the suspension system, the shock towers provide a damping effect on the overall vehicle suspension.

High quality on-road tires with chrome sprayed rims
The specification for this RC electric vehicle relates to an on road racing car. The makeup of the tires is important here. It is like differentiating between a mountain bike, with its thick, knobbly, high-friction tires and a road bike, with its slimmer, low-friction tires and a less prominent tread. It all comes down to performance requirements on the terrain that the RC vehicle was designed/intended to run on. The chrome rims adds a splash of quicksilver that finishes off the wheels nicely.

7.2v 1100mAh Ni-Mh battery power (required), 7.2v 1500mah Ni-Mh battery or 7.4v 1300mah lithium battery pack (optional)
7.2-volt nickel cadmium batteries are standard power sources, often referred to as battery packs. Although they are identical in size, they differ in capacities ranging up to 3700mAh typically. As the battery pack is extra, it is advisable to go for the largest capacity that you can afford, if you desire more running time (the downside is that you’ll need more time to charge it up).

Anodized aluminium motor heat guard
Unsurprisingly, your RC electric vehicle’s motor will get very hot. The guard thankfully provides protection against heat, which results from high speed running.

High duty front bumper foam
As with conventional, real-world automobiles, the front foam bumper needs to deliver maximum protection to your RC vehicle against impacts.

Vehicle dimensions
Length, width, height, ground clearance, net weight, wheel diameter and wheel width are self-explanatory.
Your RC electric vehicle’s wheelbase will be the length from the leading edge of its front wheels to the trailing edge of its rear wheels.

Track
Track refers to track width, the distance between the center of the left tire and the center of the right tire.

Gear Ratio
This is the relationship between the numbers of teeth on two gears that are meshed or two sprockets connected with a common roller chain, or the circumferences of two pulleys connected with a drive belt.

So, there you have it. We’ve just covered some of the basic technical terms that you are likely to come across when you are enjoying your time shopping for your future RC electric vehicles. Whatever you do, don’t be fazed by these terms – think of it as an educational experience, a journey of discovery that is a part of your enjoyment of RC electric vehicles.

Three Interior Auto Accessories You Cannot Go Without

Most of the auto enthusiasts focus on purchasing exterior car accessories to make their car look good on the road. This makes sense but as most of us look to the outside of our vehicle we tend to not consider the inside of our vehicle.

Why do most car owners focus on the outside of the vehicle? Most of us want to impress others. We act the same way when driving our cars. We want those looking at our cars to be impressed so we buy accessories to impress them. Although it is fun to impress others, there is much to be said about taking care of the interior of your vehicle.

Here are three interior auto accessories you cannot go without. The first is providing interior protection for the floor. The auto floor takes the most interior abuse. With the constant in and out grinding of shoe debris into the car carpet fibers, it does not take long for those fibers to break down. There are many ways to protect the floor. A thermoplastic tray is a popular choice. The tray is custom fit to the specific vehicle. It is available in three color choices: black, gray, and beige. The good thing about these custom molded trays is that they are flexible. They can easily be taken in and out of the car when necessary.

Rubber mats are available that are not custom to the vehicle, but by design will hold road debris in place keeping the mess off the floor. If you are running a tight budget, then vinyl protectors make sense. They are better than nothing and lay over the existing car mats.to protect them.

The second most important interior auto accessory is seat cover protection. The original seats take a lot of abuse almost the same way that the auto mats do. Constant in and out, grinding whatever is left on the seats into the seats. This is not good long term if you are trying to keep the seats looking nice, Custom seat covers are available in many fabrics. Micro Suede, PolyCotton, Velour, Blanket, Tweed, to name a few. Match the fabric to your life style and enjoy years of seat protection.

The third most important interior accessory is a seldom discussed front window heat shield. Heat shields are universal and custom made. Your best choice is the custom made version. It will mold to the specific windshield blocking all the rays of the sun. A car heats up tremendously when parked. A heat shield will not only protect the exposed dash from uv rays but will cool the car interior giving you a more comfortable car when you first get in.

Get exterior car accessories for them. Get interior car accessories for you.